Results 1 to 15 of 15

Thread: Samsung e2652 successfully flash done with flasher . - Samsung flash file issue solution ?

  1. #1
    Join Date
    Nov 2011
    Posts
    2,602
    Samsung e2652 successfully flash done with flasher .

    here driver & flasher
    flashtool_e2_rou.zip - 4shared.com - online file sharing and storage - download

    here flash file .
    Hotfile.com: One click file hosting: E2652XEKB2.rar


    Gide here for flash .

    • open FlashTool_E2
    • add bin file
    • add cds file
    • add csc file
    • add ui file
    • add psi file
    • now mark {starup in normal mode }
    • select erase while flash before download
    • click next
    • now click start usb1
    • connect phone with boot mode
    • here boot mode {press vol upkey +lock key with battery connect usb }
    • and wait for success





    here more with done logo .



    1st step

    http://img828.imageshack.us/img828/8861/veow8p.jpg

    2nd step
    http://img851.imageshack.us/img851/9253/zj6veg.jpg




    azimbahar

  2. #2
    Join Date
    Nov 2011
    Posts
    7,020
    its a stolen tool from samsung service center and its illegal . .

  3. #3
    Join Date
    Apr 2012
    Posts
    2,086


    really ???????????????????????????????

  4. #4
    Join Date
    Apr 2012
    Posts
    2,048
    Doeas updating any mobile firmware without offcial software and unlocking is legaltitle=eek!? wake up baby title=big* you are in real world.title=stick

  5. #5
    Join Date
    Apr 2012
    Posts
    2,048
    keeping up good job * and for the illegal boy if u do not so do nott use it

  6. #6
    Join Date
    Nov 2011
    Posts
    6,927
    Device synchronized.

    Injecting EBL-Loader (RPSI).

    Injecting EBL

    Boot-loader is active

    EBL version: 6180_Bootloader_10.0_MKEYSKEY 10..0

    Boot mode is: BB

    Using: Faster CRC* Writing all blocks

    Package length is 16384 - protocol: 3.32

    Baud rate set to 921600

    Get flash id.

    CFI stage 1

    Flash ID is: 220800EC

    CFI stage 2

    Boot process finished


    Start downloading item CODE:CATFISH.fls from file F:z3xe2650E2652XEKB2E2652XXKB2E2652XXKB2_BIN .fls.

    Erasing all flash memory

    Sending sec-pack.

    Load region 0

    Use flash pre-erase.

    Sending data.

    WARNING: Target EBL does not support NVM handling

    Sending end-pack.

    Checksum OK (0xC525)

    Verify OK

    Process time was 2 min 54 sec.


    Start downloading item CODE:CATFISH.fls from file F:z3xe2650E2652XEKB2E2652XXKB2E2652XXKB2_CDS .fls.

    Sending sec-pack.

    Load region 0

    Use flash pre-erase.

    Sending data.

    WARNING: Target EBL does not support NVM handling

    Sending end-pack.

    Checksum OK (0x558F)

    Verify OK

    Process time was 3.2 sec.


    Start downloading item CUST:temp_GT-E2652_OXE.dffs from file F:z3xe2650E2652XEKB2E2652XXKB2E2652OXEKB2_CS C.dffs.

    Sending sec-pack.

    Load region 0

    Use flash pre-erase.

    Sending data.

    Sending end-pack.

    Verify OK

    Process time was 1 min 35 sec.


    Start downloading item CODE:temp_UI_IMAGE.fls from file F:z3xe2650E2652XEKB2E2652XXKB2E2652XXKB2_UI_ IMAGE.fls.

    Sending sec-pack.

    Load region 0

    Use flash pre-erase.

    Sending data.

    WARNING: Target EBL does not support NVM handling

    Sending end-pack.

    Checksum OK (0xFE03)

    Verify OK

    Process time was 19.8 sec.


    Start downloading item BOOT CORE SLB:dwdtoolsrc/bootcore/make/.output/XMM6180_EHS2AGR_CATFISH_ROU_TETHYS/fls/psi_flash.fls from file F:z3xe2650E2652XEKB2E2652XXKB2E2652XXKB2_psi _flash.fls.

    Sending sec-pack.

    Load region 0

    Use flash pre-erase.

    Sending data.

    Sending end-pack.

    Checksum OK (0x8005)

    Verify OK

    Process time was 1875 msec.


    Total time was 5 min 1 sec.

    Channel 1 is succesfully closed.

  7. #7
    Join Date
    Apr 2012
    Posts
    2,046
    Flashed successfully. I was trying to flash with z3x but no luck. Flashed with patched firmware and then unlock with z3x for sim unlocking. All is well.

  8. #8
    Join Date
    Nov 2011
    Posts
    7,043
    Thank you very much

    100%

  9. #9
    Join Date
    Apr 2012
    Posts
    2,080
    if you like my post press only thanks .

  10. #10
    Join Date
    Nov 2011
    Posts
    6,917
    thkssssssssssssssssssssssssssssss good job brot

  11. #11
    Join Date
    Nov 2011
    Posts
    7,047
    Quote:

    bijitech
    Device synchronized.

    Injecting EBL-Loader (RPSI).

    Injecting EBL

    Boot-loader is active

    EBL version: 6180_Bootloader_10.0_MKEYSKEY 10..0

    Boot mode is: BB

    Using: Faster CRC* Writing all blocks

    Package length is 16384 - protocol: 3.32

    Baud rate set to 921600

    Get flash id.

    CFI stage 1

    Flash ID is: 220800EC

    CFI stage 2

    Boot process finished


    Start downloading item CODE:CATFISH.fls from file F:z3xe2650E2652XEKB2E2652XXKB2E2652XXKB2_BIN .fls.

    Erasing all flash memory

    Sending sec-pack.

    Load region 0

    Use flash pre-erase.

    Sending data.

    WARNING: Target EBL does not support NVM handling

    Sending end-pack.

    Checksum OK (0xC525)

    Verify OK

    Process time was 2 min 54 sec.


    Start downloading item CODE:CATFISH.fls from file F:z3xe2650E2652XEKB2E2652XXKB2E2652XXKB2_CDS .fls.

    Sending sec-pack.

    Load region 0

    Use flash pre-erase.

    Sending data.

    WARNING: Target EBL does not support NVM handling

    Sending end-pack.

    Checksum OK (0x558F)

    Verify OK

    Process time was 3.2 sec.


    Start downloading item CUST:temp_GT-E2652_OXE.dffs from file F:z3xe2650E2652XEKB2E2652XXKB2E2652OXEKB2_CS C.dffs.

    Sending sec-pack.

    Load region 0

    Use flash pre-erase.

    Sending data.

    Sending end-pack.

    Verify OK

    Process time was 1 min 35 sec.


    Start downloading item CODE:temp_UI_IMAGE.fls from file F:z3xe2650E2652XEKB2E2652XXKB2E2652XXKB2_UI_ IMAGE.fls.

    Sending sec-pack.

    Load region 0

    Use flash pre-erase.

    Sending data.

    WARNING: Target EBL does not support NVM handling

    Sending end-pack.

    Checksum OK (0xFE03)

    Verify OK

    Process time was 19.8 sec.


    Start downloading item BOOT CORE SLB:dwdtoolsrc/bootcore/make/.output/XMM6180_EHS2AGR_CATFISH_ROU_TETHYS/fls/psi_flash.fls from file F:z3xe2650E2652XEKB2E2652XXKB2E2652XXKB2_psi _flash.fls.

    Sending sec-pack.

    Load region 0

    Use flash pre-erase.

    Sending data.

    Sending end-pack.

    Checksum OK (0x8005)

    Verify OK

    Process time was 1875 msec.


    Total time was 5 min 1 sec.

    Channel 1 is succesfully closed.
    thanks for your tested post .

  12. #12
    Join Date
    Nov 2011
    Posts
    7,063
    thanks dear please send B3410 filash file or flasher

  13. #13
    Join Date
    Apr 2012
    Posts
    2,093
    Process time was 30.0 sec.


    An EBL must be injected. None was found in the downloaded file.

    For some systems there must be an injected EBL. The file specified for download does not contain an injected EBL.

    Check that the file is correct for the target. This error can also occur on a normal boot time out* in which case just try again.

    Channel 1 is succesfully closed.

  14. #14
    Join Date
    Apr 2012
    Posts
    2,045
    thanks so much sir great job keep it up

  15. #15
    Join Date
    Apr 2012
    Posts
    2,093
    Thank you very much

    100%

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Replies: 33
    Last Post: 05-28-2013, 02:57 PM
  2. Replies: 2
    Last Post: 03-06-2013, 07:30 AM
  3. Replies: 3
    Last Post: 08-27-2012, 05:36 AM
  4. Replies: 8
    Last Post: 04-13-2012, 10:55 AM
  5. Replies: 3
    Last Post: 04-11-2012, 12:32 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •