Welcome to the ShaarpMind Forum.






+ Reply to Thread + Post New Thread
Results 1 to 6 of 6
  1. #1
    Member
    Join Date
    Nov 2011
    Posts
    2,548

    Thumbs up how to write imei kenxinda m2 spd6610 - Volcano Box issue solution ?


     

    /



    Volcano Updated: 2012-04-16

    Connecting...

    Connection successful*connected state!

    Version: V3.8

    SN:006-032-721

    Port:COM5

    Available Ports:COM3 COM5

    Detection initiated...

    Vcc: 1

    Gnd: 2

    Analyzing D+ and D-...

    D+ = 6* D- = 8

    Analyzing USB device* kindly wait...

    Find USB device:SCI USB2Serial (COM44)* (VID_1782&PID_4D00)



    Internal version: Spreadtrum Boot Block version 2.0

    Boot downloaded.

    Start boot kindly wait a moment....

    BOOT Ver: Spreadtrum Boot Block version 1.2

    CPU TYPE:SC6610/20 [66100000]

    kindly select Boot J and try again.

    kindly change Boot or reduce Baudrate* try it again.

    Ready to read/write again* kindly remove the clip or battery and then re-loaded it.

    Detection initiated...

    Vcc: 1

    Gnd: 2

    Analyzing D+ and D-...

    D+ = 6* D- = 8

    Analyzing USB device* kindly wait...

    Find USB device:SCI USB2Serial (COM44)* (VID_1782&PID_4D00)



    Internal version: Spreadtrum Boot Block version 2.0

    Boot downloaded.

    Start boot kindly wait a moment....

    Boot fileSpreadtrum Boot Block version 1.2

    CPU TYPE:SC6610/20 [66100000]

    FLASH ID: 00F8003200160000

    Flash Type:[FIDELIX] FM25Q32

    Size:0x400000(4MB)

    Reading completed.

    The data has been saved in D:lgnewgpgdragonflase1kenxinda m2\_20120417_163528_FullFlash volcono.bin* size: 4 M.

    When R/W IMEI is COM* Detect Type should select 6600(COM) or 8800(COM)

    Detection initiated...

    Vcc: 1

    Gnd: 2

    Analyzing D+ and D-...

    D+ = 6* D- = 8

    Analyzing USB device* kindly wait...

    Find USB device:SCI USB2Serial (COM44)* (VID_1782&PID_4D00)

    Currently only support 8800H

    When R/W IMEI is COM* Detect Type should select 6600(COM) or 8800(COM)

    Detection initiated...

    Vcc: 1

    Gnd: 2

    Analyzing D+ and D-...

    D+ = 6* D- = 8

    Analyzing USB device* kindly wait...

    Find USB device:SCI USB2Serial (COM44)* (VID_1782&PID_4D00)

    >>C:Program FilesVolcano TeamVolcanoBoxPrtScnPIC_2012_04_17_4_40_22_PM.j pg saved.


    Follow us on TwitterFollow us on FaceBook

  2. #2
    Member
    Join Date
    Nov 2011
    Posts
    7,061

    Thumbs up how to write imei kenxinda m2 spd6610 - Volcano Box issue solution ?


     
    Select com/rx/tx and try*


    post ur result.


    brtitle=wink


    Follow us on TwitterFollow us on FaceBook

  3. #3
    Member
    Join Date
    Apr 2012
    Posts
    1,754

    Thumbs up how to write imei kenxinda m2 spd6610 - Volcano Box issue solution ?


     
    Analyzing Rx and Tx...

    User stop

    Pinouts are not fonud!

    Detecting rx and tx...

    Vcc: 1

    Gnd: 2

    Detection initiated* connect the phone and power on it...

    >>Failed to detect.


    Follow us on TwitterFollow us on FaceBook

  4. #4
    Member
    Join Date
    Apr 2012
    Posts
    1,786

    Thumbs up how to write imei kenxinda m2 spd6610 - Volcano Box issue solution ?


     
    kenxinda m2 spd6610 sim regsitration failed prob pl to be helped


    Follow us on TwitterFollow us on FaceBook

  5. #5
    Member
    Join Date
    Apr 2012
    Posts
    1,796

    Thumbs up how to write imei kenxinda m2 spd6610 - Volcano Box issue solution ?


     
    i asked the same question how to write imei Please post video still didnt got answer want video to change imei in spd


    Follow us on TwitterFollow us on FaceBook

  6. #6
    Member
    Join Date
    Apr 2012
    Posts
    1,833

    Thumbs up how to write imei kenxinda m2 spd6610 - Volcano Box issue solution ?




     
    can you kindly try Along with on board pinouts ?


    brtitle=wink


    Follow us on TwitterFollow us on FaceBook


 
+ Reply to Thread

Similar Threads

  1. Replies: 0
    Last Post: 11-22-2012, 01:23 PM
  2. Replies: 7
    Last Post: 06-05-2012, 07:16 AM
  3. Replies: 5
    Last Post: 06-05-2012, 05:28 AM
  4. Replies: 2
    Last Post: 05-20-2012, 01:00 PM
  5. Replies: 0
    Last Post: 05-20-2012, 11:16 AM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts