Welcome to the Shaarp Mind Forum.






+ Reply to Thread + Post New Thread
Results 1 to 8 of 8
  1. #1
    Member
    Join Date
    Feb 2011
    Posts
    10,354

     
    JAF version 1.98.66 beta5
    Detected PKEY: +++++++
    P-key nokia module version 01.02
    Detected JAF INTERFACE version: 01.B4* Driver version: 20422* Library version: 30119
    JAF DCT4/BB5 LOADERS DIR: C:Program FilesODEONJAFFlash
    JAF DCT4/BB5 PRODUCT DIR: C:Program FilesNokiaPhoenixProducts
    JAF USB LOADERS DIR: C:Program FilesODEONJAFFlashUSB
    JAF DCT3/DCTL LOADERS DIR: C:Program FilesODEONJAFFlash3
    USB Cable Driver version: 7.1.29.0
    Changing mode...Done!
    Scanning RPL file...
    NPC DATA OK...
    VARIANT DATA NOT FOUND...
    CCC DATA OK...
    HWC DATA OK...
    NPC APE DATA NOT FOUND...
    VARIANT APE DATA NOT FOUND...
    CCC APE DATA NOT FOUND...
    HWC APE DATA NOT FOUND...
    SIMLOCK DATA NOT FOUND...
    SIMLOCK KEY DATA NOT FOUND...
    SUPERDONGLE KEY DATA NOT FOUND...
    CMLA KEY DATA NOT FOUND...
    WMDRM PD DATA NOT FOUND...
    Connecting to phone...
    FAST PHONE detected!
    CMT Boot File: C:Program FilesODEONJAFFlash
    ap3gv3_2nd.fg
    Loader version: 09.0B.01 -> Revision: 0000
    Patching CMT boot step1...
    Patching CMT boot step2...
    Patching CMT boot step3...
    CMT Boot Ready
    CMT Flash ID: 89820089 <=> INTEL -> Type not in database
    CMT Flash Data: 00000000000000000000000000000000
    CMT Loader: C:Program FilesODEONJAFFlashRAP3Gv3_algo.fg
    Loader version: 09.2F.00 -> Revision: 0000
    Patching CMT loader step1...
    Patching CMT loader step3...
    CMT Loader Ready
    Writing NPC DATA...
    Writing CCC DATA...
    Writing HWC DATA...
    Restarting phone...
    Done!
    FILES SET FOR FLASHING:
    MCU Flash file: NONE
    PPM Flash file: NONE
    CNT Flash file: NONE
    APE Variant file: NONE
    Switching to serial...
    Powering the phone...
    Reading...
    MCU SW version: V 07.80
    18-08-09
    RM-561
    (c) Nokia
    HW version: 1000
    PCI version:
    RFIC version:  06540601
    DSP version: 
    ICPR72_09w24
    LCD version: SEIKO
    PPM version: V 07.80
    18-08-09
    RM-561
    (c) Nokia
    MEN
    BT MCM version: 2222-143C
    Retu version: 16
    Tahvo version: 22
    Content Pack version: Content: mena_b_black
    V 07.80
    18-08-09
    RM-561
    (c) Nokia
    Production serial number: DAT927304
    Product code: 0579321
    Module code: 0204245
    Basic production code: 0577212
    Flash code:
    Order number:
    Product specific data:
    Long production SN: 0
    ATO:
    Default SN type:
    IMEI plain: 3593********
    IMEI spare to net: 3A 95 63 00 23 03 79 04
    IMEI SV to net: 33 95 63 00 23 03 79 44 F4
    LOCK STATUS:
    CONFIG KEY: 0000000000000000


    PROVIDER KEY: 2440700000000000
    Provider: AT&T;U.S.A. (3650)
    Key Code count: 0* FBUS Code count: 0
    Block 1:
    Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
    Block 2:
    Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
    Block 3:
    Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
    Block 4:
    Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
    Block 5:
    Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
    Block 6:
    Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
    Block 7:
    Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
    Searching for saved ini...
    Checking for file C:Program FilesODEONJAFJAF_RM-561.ini
    Saved INI not found* loading INI list...
    Setting local mode...
    Reading product code...
    Product Code: 0579321
    Searching for JAF saved location of ini...
    Checking path: C:Program FilesNokiaPhoenixProductsRM-561
    Searching for default location of ini...
    Checking path: ProductsRM-561
    Searching for JAF saved location of ini...
    Checking path: C:Program FilesNokiaPhoenixProductsRM-561
    No ini files found...
    FILES SET FOR FLASHING:
    MCU Flash file: NONE
    PPM Flash file: NONE
    CNT Flash file: NONE
    APE Variant file: NONE
    Done!

  2. #2
    Moderator
    Join Date
    Jan 2011
    Posts
    40,414

     
    Phone Type: RM-561 (Nokia 2700 classic)
    SW Version: V 07.80 18-08-09 RM-561 (c) Nokia
    Imei plain: 3593600******
    Product Code: 0579321
    Language Pack:
    - not available.
    This is SL3 phone(Simlock2 format).
    - Avoid SW Downgrade & manual erase to this phone !
    SIMLOCK seems to be valid
    SUPERDONGLE_KEY seems to be valid
    CMLA_KEY seems to be valid
    WMDRM_PD seems to be valid
    SIMLOCK_TEST passed
    SECURITY_TEST passed
    Imei net: 35936003****
    Version: SIMLOCK SERVER
    Provider: Nokia Test* Country: Finland
    Counter: 0/3* 0/10
    CONFIG_DATA: 2440700000000000
    PROFILE_BITS: 0000000000000000
    BLOCK 1: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN* DATA=FFFFFF
    BLOCK 2: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN* DATA=FFFFFF
    BLOCK 3: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN* DATA=FFFFFF
    BLOCK 4: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN* DATA=FFFFFF
    BLOCK 5: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN* DATA=FFFFFF
    BLOCK 6: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN* DATA=FFFFFF
    BLOCK 7: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN* DATA=FFFFFF

  3. #3
    Member
    Join Date
    Feb 2011
    Posts
    36,302

     
    Quote:

    SIMLOCK seems to be valid
    SUPERDONGLE_KEY seems to be valid
    CMLA_KEY seems to be valid
    WMDRM_PD seems to be valid
    SIMLOCK_TEST passed
    SECURITY_TEST passed post selftest log.........here

  4. #4
    Member
    Join Date
    Feb 2011
    Posts
    38,312

     
    any one have any solution ???? plz tell meeeeee

  5. #5
    Member
    Join Date
    Feb 2011
    Posts
    35,844

     
    bro *when you press power show contact service or startup without sim card then press ok show contact service?

  6. #6
    Member
    Join Date
    Feb 2011
    Posts
    35,925

     
    brother contact service problem not for only software*hardware make same contact service problem
    just trun self test then check which is show failed
    then easy find fault
    post result

  7. #7
    Member
    Join Date
    Feb 2011
    Posts
    38,144

     
    (1) you press power show contact service (HARDWEAR PROBLEM)
    (2) startup without sim card then press ok show contact service (THIS SOFTWEAR PROBLEM) this problem is solve
    (thish procedure solve youp problem)
    you first handset backup rpl* full pm (0-512) after sx4 for mxkey write good pm solve your problem

  8. #8
    Member
    Join Date
    Feb 2011
    Posts
    38,312

     
    Quote:
    naveed ali [Only registered and activated users can see links. ] JAF version 1.98.66 beta5
    Detected PKEY: +++++++
    P-key nokia module version 01.02
    Detected JAF INTERFACE version: 01.B4* Driver version: 20422* Library version: 30119
    JAF DCT4/BB5 LOADERS DIR: C:Program FilesODEONJAFFlash
    JAF DCT4/BB5 PRODUCT DIR: C:Program FilesNokiaPhoenixProducts
    JAF USB LOADERS DIR: C:Program FilesODEONJAFFlashUSB
    JAF DCT3/DCTL LOADERS DIR: C:Program FilesODEONJAFFlash3
    USB Cable Driver version: 7.1.29.0
    Changing mode...Done!
    Scanning RPL file...
    NPC DATA OK...
    VARIANT DATA NOT FOUND...
    CCC DATA OK...
    HWC DATA OK...
    NPC APE DATA NOT FOUND...
    VARIANT APE DATA NOT FOUND...
    CCC APE DATA NOT FOUND...
    HWC APE DATA NOT FOUND...
    SIMLOCK DATA NOT FOUND...
    SIMLOCK KEY DATA NOT FOUND...
    SUPERDONGLE KEY DATA NOT FOUND...
    CMLA KEY DATA NOT FOUND...
    WMDRM PD DATA NOT FOUND...
    Connecting to phone...
    FAST PHONE detected!
    CMT Boot File: C:Program FilesODEONJAFFlash
    ap3gv3_2nd.fg
    Loader version: 09.0B.01 -> Revision: 0000
    Patching CMT boot step1...
    Patching CMT boot step2...
    Patching CMT boot step3...
    CMT Boot Ready
    CMT Flash ID: 89820089 <=> INTEL -> Type not in database
    CMT Flash Data: 00000000000000000000000000000000
    CMT Loader: C:Program FilesODEONJAFFlashRAP3Gv3_algo.fg
    Loader version: 09.2F.00 -> Revision: 0000
    Patching CMT loader step1...
    Patching CMT loader step3...
    CMT Loader Ready
    Writing NPC DATA...
    Writing CCC DATA...
    Writing HWC DATA...
    Restarting phone...
    Done!
    FILES SET FOR FLASHING:
    MCU Flash file: NONE
    PPM Flash file: NONE
    CNT Flash file: NONE
    APE Variant file: NONE
    Switching to serial...
    Powering the phone...
    Reading...
    MCU SW version: V 07.80
    18-08-09
    RM-561
    (c) Nokia
    HW version: 1000
    PCI version:
    RFIC version:  06540601
    DSP version: 
    ICPR72_09w24
    LCD version: SEIKO
    PPM version: V 07.80
    18-08-09
    RM-561
    (c) Nokia
    MEN
    BT MCM version: 2222-143C
    Retu version: 16
    Tahvo version: 22
    Content Pack version: Content: mena_b_black
    V 07.80
    18-08-09
    RM-561
    (c) Nokia
    Production serial number: DAT927304
    Product code: 0579321
    Module code: 0204245
    Basic production code: 0577212
    Flash code:
    Order number:
    Product specific data:
    Long production SN: 0
    ATO:
    Default SN type:
    IMEI plain: 3593********
    IMEI spare to net: 3A 95 63 00 23 03 79 04
    IMEI SV to net: 33 95 63 00 23 03 79 44 F4
    LOCK STATUS:
    CONFIG KEY: 0000000000000000
    PROVIDER KEY: 2440700000000000
    Provider: AT&T;U.S.A. (3650)
    Key Code count: 0* FBUS Code count: 0
    Block 1:
    Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
    Block 2:
    Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
    Block 3:
    Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
    Block 4:
    Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
    Block 5:
    Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
    Block 6:
    Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
    Block 7:
    Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
    Searching for saved ini...
    Checking for file C:Program FilesODEONJAFJAF_RM-561.ini
    Saved INI not found* loading INI list...
    Setting local mode...
    Reading product code...
    Product Code: 0579321
    Searching for JAF saved location of ini...
    Checking path: C:Program FilesNokiaPhoenixProductsRM-561
    Searching for default location of ini...
    Checking path: ProductsRM-561
    Searching for JAF saved location of ini...
    Checking path: C:Program FilesNokiaPhoenixProductsRM-561
    No ini files found...
    FILES SET FOR FLASHING:
    MCU Flash file: NONE
    PPM Flash file: NONE
    CNT Flash file: NONE
    APE Variant file: NONE
    Done!
    br this Hardware prob just rehot power ic.....


 

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

     

Similar Threads

  1. nokia 2700c contact service
    By DanMaster in forum Nokia
    Replies: 14
    Last Post: 09-13-2011, 07:05 AM
  2. nokia 2700c contact service ??????????????
    By Developer007 in forum Nokia
    Replies: 14
    Last Post: 02-28-2011, 09:02 AM
  3. nokia 2700c contact service
    By kris in forum Nokia
    Replies: 13
    Last Post: 02-28-2011, 08:35 AM
  4. nokia 2700c contact service ??????????????
    By cellPhoneIdea in forum BB5
    Replies: 14
    Last Post: 02-16-2011, 06:45 PM

Tags for this Thread