Shaarp Mind Forum




Results 1 to 12 of 12
  1. #1
    Member
    Join Date
    Feb 2011
    Posts
    10,292
    Hello.
    I have problem with N82.
    After flash blue screen and nothing else.
    Here is log:
    Phone Type: RM-313 (Nokia N82)
    SW Version: V 06wk41v64.24 05-11-09 RM-313 (c) Nokia
    Imei plain: ****x (normal imei)
    Product Code: 0551526
    Language Pack:
    - not available.
    SIMLOCK seems to be valid
    SUPERDONGLE_KEY seems to be valid
    SIMLOCK_TEST passed
    SECURITY_TEST passed
    Imei net: 3580****
    Version: SIMLOCK SERVER
    Provider: ERA GSM
    Counter: 0/3* 0/10
    CONFIG_DATA: 2600200000000000
    PROFILE_BITS: 0000000000000000
    BLOCK 1: 1=LOCKED (MCC+MNC): 26002F* DATA=26002F
    BLOCK 2: 1=LOCKED (MCC+MNC): 26002F* DATA=26002F
    Full pm writen*
    When i try use solution for e51/e66 with cnt i have error.
    Where is the problem?
    Its problem SW. HW is ok.

  2. #2
    Member
    Join Date
    Feb 2011
    Posts
    36,295
    renew
    phone flash with jaf* mx* hwk* problem stay
    any solution?

  3. #3
    Member
    Join Date
    Feb 2011
    Posts
    36,295
    Quote:
    kowalkarol1 / renew
    phone flash with jaf* mx* hwk* problem stay
    any solution? wait dear i am same model and same problem working....i hope i will be success...then i post details....for you...

  4. #4
    Member
    Join Date
    Feb 2011
    Posts
    36,025
    Quote:
    kowalkarol1 / renew
    phone flash with jaf* mx* hwk* problem stay
    any solution? / now my 82 is fully running.....i am succed on my misson..... /
    Contact Me
    Akash flashcare@ymail.com
    031-01743-919797
    031-01818-245103

  5. #5
    Member
    Join Date
    Feb 2011
    Posts
    35,699
    Quote: [COLOR=Magenta][SIZE=5][FONT=Georgia][I][B]now my 82 is fully running.....i am succed on my misson..... Where is your solution* please?
    I have same problem (hang on nokia logo) after try to recover startup Failed* Contact reseller.
    This problem occur after I do full erase* flash eno... (have try to full step recover with firmware v11* v31* v35) and try rehot flash ic still no luck.
    Maybe is the ENO file that I flash is not suitable* anyone have older ENO file ( RM-313_dp_N82_ENO_x_2007wk38v0.120.fpsx ) ? Thanks.

  6. #6
    Member
    Join Date
    Feb 2011
    Posts
    35,920
    Maybe problem is in full erase in mxkey?
    I will try full erase with erase file (JAF)

  7. #7
    Member
    Join Date
    Feb 2011
    Posts
    38,148
    Quote:
    kowalkarol1 / Maybe problem is in full erase in mxkey?
    I will try full erase with erase file (JAF) Did you try using 256MB_RAPIDO_YAWE_erase.bin file for erase?

  8. #8
    Member
    Join Date
    Feb 2011
    Posts
    36,025
    Quote:
    hendavi / Did you try using 256MB_RAPIDO_YAWE_erase.bin file for erase? Now yes* full erase(erase uni rapido etc.)* --> flash by jaf phone stay on logo nokia
    full erase with file(erase uni rapido etc.) ---> flash by mxkey phone stay on black(only lights on) but when flash eno file* stay on logo nokia
    Where is problem?
    Maybe in partition? mxkey and jaf cant scan partition on phone.
    After full erase* when phone is flashing mx do partitioning..
    Anybody can help?

  9. #9
    Member
    Join Date
    Feb 2011
    Posts
    35,599
    I think the solution for e51/e66 blank file is the same with like N82 normalize_susd_eno_sharaku_urel.fpsx
    I never try flash again with normalize file at the end of full flashing.
    Here is my step flashing:
    1. Full erase
    2. flash this eno rm313_ENO_x_2008wk06updv0.030.fpsx
    3. flash this eno too normalize_susd_eno_sharaku_urel.fpsx
    4. full flash
    5. Write NPC_RPL
    6. Write Full PM (no sx4 auth)
    7. Repair sim lock rpl
    8. Repair Superdongle
    9. Write PM 1 & 309 with Super SD auth
    10. Full Factory setting.
    By the way* I have sent my phone to mobile repairing shop for hardware inspection. Lets see what solution they have.

  10. #10
    Member
    Join Date
    Feb 2011
    Posts
    35,836
    Quote:
    hendavi / I think the solution for e51/e66 blank file is the same with like N82 normalize_susd_eno_sharaku_urel.fpsx
    I never try flash again with normalize file at the end of full flashing.
    Here is my step flashing:
    1. Full erase
    2. flash this eno rm313_ENO_x_2008wk06updv0.030.fpsx
    3. flash this eno too normalize_susd_eno_sharaku_urel.fpsx
    4. full flash
    5. Write NPC_RPL
    6. Write Full PM (no sx4 auth)
    7. Repair sim lock rpl
    8. Repair Superdongle
    9. Write PM 1 & 309 with Super SD auth
    10. Full Factory setting.
    By the way* I have sent my phone to mobile repairing shop for hardware inspection. Lets see what solution they have. tested not ok
    phone stay on logo nokia
    log:
    Phone Type: RM-313 (Nokia N82)
    SW Version: V 06wk41v47.5 07-12-07 RM-313 (c) Nokia
    Imei plain: 35*****-4
    Product Code: 0551526
    ApeCoreSw: 11.0.117
    ApeVariant: 11.0.117* ApeTest: rm313_eno_2008wk06updv0.030
    ContentPack: V 013 10-12-07 u01 RM-313
    Language Pack:
    - not available.
    SIMLOCK seems to be valid
    SUPERDONGLE_KEY seems to be valid
    SIMLOCK_TEST passed
    SECURITY_TEST passed
    Imei net: 35*****
    Version: SIMLOCK SERVER
    Provider: ERA GSM * Country: Poland
    Counter: 0/3* 0/10
    CONFIG_DATA: 2600200000000000
    PROFILE_BITS: 0000000000000000
    BLOCK 1: 1=LOCKED (MCC+MNC): 26002F* DATA=26002F
    BLOCK 2: 1=LOCKED (MCC+MNC): 26002F* DATA=26002F
    OK
    Completed in 2 min 2.235 s
    FULL FACTORY... OK
    Completed in 12.609 s

  11. #11
    Member
    Join Date
    Feb 2011
    Posts
    35,920
    maybe LCD & HD problem :-;

  12. #12
    Member
    Join Date
    Feb 2011
    Posts
    36,295
    Quote:
    hendavi / I think the solution for e51/e66 blank file is the same with like N82 normalize_susd_eno_sharaku_urel.fpsx
    I never try flash again with normalize file at the end of full flashing.
    Here is my step flashing:
    1. Full erase
    2. flash this eno rm313_ENO_x_2008wk06updv0.030.fpsx
    3. flash this eno too normalize_susd_eno_sharaku_urel.fpsx
    4. full flash
    5. Write NPC_RPL
    6. Write Full PM (no sx4 auth)
    7. Repair sim lock rpl
    8. Repair Superdongle
    9. Write PM 1 & 309 with Super SD auth
    10. Full Factory setting.
    By the way* I have sent my phone to mobile repairing shop for hardware inspection. Lets see what solution they have. ya.this is perfect solution...i am suceed as like this solutin.....

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •