Welcome to the Shaarp Mind Forum.






+ Reply to Thread + Post New Thread
Results 1 to 4 of 4
  1. #1
    Member
    Join Date
    Feb 2011
    Posts
    12,392

     

    i got this phone in dead condition


    not a dropped phone not water damage

    set suddenly dead


    i flash with latest version but still no power

    also change lcd







    VBATT OFF...

    VBATT ON

    Setting VBATT Done!...


    Booting Phone...

    CPU ID Response: A200341100

    CPU Type: XG110 2.1B

    Phone Booted at after First attempt...


    ************************************************** ****

    TIME STARTS HERE

    ************************************************** ****



    Sending PBL 37888 bytes...

    PBL Successfully Sent...

    Sending SBL 65024 bytes...

    SBL Successfully Sent...


    Flash Chip Manufacturer: Samsung Electronics Corp.

    Flash Chip Type: K8S6415ETC 64 Mbit (4Mb x 16) NOR

    Extended Information: Multiple Bank / Burst / 1.8v


    Processing Image File: C:Program FilesNokiaPhoenixProductsRM-647
    m647_006.200


    FIRMWARE Image Found...

    Number of Sections: 03

    FIRMWARE Certificate Block Sent Successfully...

    Processing Section 01 of 03

    FIRMWARE Erase Block: 0x00800000~0x00A0FFFE

    Start Erasing...

    Erasing Please Wait...

    Block Erase Done...

    Preparing Data Blocks...

    Data Size: 2162688 bytes

    Data Checksum: 0E71

    Uploading Data Blocks to phone...

    FIRMWARE Data Blocks uploaded to phone...

    Processing Section 02 of 03

    FIRMWARE Erase Block: 0x00C60000~0x00EAFFFE

    Start Erasing...

    Erasing Please Wait...

    Block Erase Done...

    Preparing Data Blocks...

    Data Size: 2020800 bytes

    Data Checksum: 0C57

    Uploading Data Blocks to phone...

    FIRMWARE Data Blocks uploaded to phone...

    Processing Section 03 of 03

    FIRMWARE Erase Block: 0x00FFC000~0x00FFFFFE

    Start Erasing...

    Erasing Please Wait...

    Block Erase Done...

    Preparing Data Blocks...

    Data Size: 64 bytes

    Data Checksum: 0000

    Uploading Data Blocks to phone...

    FIRMWARE Data Blocks uploaded to phone...

    Start Data Verification... (Please wait)

    Data Verification Successful...



    Processing Image File: C:Program FilesNokiaPhoenixProductsRM-647
    m647_006.20aa


    PPM Image Found...

    Number of Sections: 01

    PPM Certificate Block Sent Successfully...

    Processing Section 01 of 01

    PPM Erase Block: 0x00210000~0x0039D37E

    Start Erasing...

    Erasing Please Wait...

    Block Erase Done...

    Preparing Data Blocks...

    Data Size: 1627008 bytes

    Data Checksum: E884

    Uploading Data Blocks to phone...

    PPM Data Blocks uploaded to phone...

    Start Data Verification... (Please wait)

    Data Verification Successful...



    Processing Image File: C:Program FilesNokiaPhoenixProductsRM-647
    m6470_nai06.20aa


    CONTENT Image Found...

    Number of Sections: 01

    CONTENT Certificate Block Sent Successfully...

    Processing Section 01 of 01

    CONTENT Erase Block: 0x00EB0000~0x00F0793E

    Start Erasing...

    Erasing Please Wait...

    Block Erase Done...

    Preparing Data Blocks...

    Data Size: 358720 bytes

    Data Checksum: B1D0

    Uploading Data Blocks to phone...

    CONTENT Data Blocks uploaded to phone...

    Start Data Verification... (Please wait)

    Data Verification Successful...



    Exit Flash Mode Done...

    Time Elapse : 00:02:20


    ************************************************** ****

    You must Factory Reset the phone to enable the

    ringtones and other customized settings to work

    ************************************************** ****



    Waiting For Phone to go Online...


    5* 4* 3* 2* 1...

    ERROR : PHONE READ INFO FAILED


    i try these ways


    but still same


    try flashing with atf and mxkey


    flashing complete but ui failed


    when connect to power supply and press power key set take power and needle continuously shaking but set not power on

  2. #2
    Associated Moderator
    Join Date
    Apr 2011
    Posts
    17,022

     
    first check display.....very few chances of display problem in ur case acc to log... but first check it ....
    if not solve then rehot cpu ...
    post result....

  3. #3
    Member Newly joined
    Join Date
    Jan 2012
    Location
    gujarat
    Posts
    2

     
    i have nokia 1280 its on after flash on pc but it dosent on with bettry what would i do plz help me?

  4. #4
    V I P
    Join Date
    Dec 2011
    Posts
    3,777

     
    Quote * v k d *
    i have nokia 1280 its on after flash on pc but it dosent on with bettry what would i do plz help me?
    first remove local mode resistance some time problem in bsi line


 

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

     

Similar Threads

  1. Replies: 3
    Last Post: 03-16-2013, 01:42 PM
  2. Nokia 1280 Dead Solution
    By Big_B in forum Hardware
    Replies: 1
    Last Post: 12-22-2012, 06:12 PM
  3. 1280 dead
    By waseemgee1 in forum Hardware
    Replies: 2
    Last Post: 08-04-2012, 04:34 AM
  4. 1280 goes dead - Advacne Box issue solution ?
    By STtheGhost in forum Advance-Box
    Replies: 3
    Last Post: 05-03-2012, 11:59 PM
  5. ..::1280 dead any solution::..
    By RobinHud in forum Nokia
    Replies: 9
    Last Post: 09-08-2011, 09:44 PM

Tags for this Thread